Hello.
I have some issues with the autocombine. when i start it with the auto ( so that it follows the edge of the field) after lets say 5 min. it stops .. the headder is truned on but it does not go farward. it stops ther e only if i turn it to normal ( just like the normal worker it works again) if i use the auto setting. it stops . can anyone help me ? 
Perhaps there are a conflict with drivecontrol? It's just an idea.
I use autocombine (Version 4.01) too, an have no problems. But i don't use drivecontrol.
Perhaps there are a conflict with drivecontrol? It's just an idea.
I use autocombine (Version 4.01) too, an have no problems. But i don't use drivecontrol.
and is there any way to see if they confict? does it get written in the log file ?
Just a simple test.
Remove drivecontrol from mods directory an look if autocombine works or not. 
Just a simple test.
Remove drivecontrol from mods directory an look if autocombine works or not.
it does the same thing even after i removed the drive control. after the first unload it stops tehre , the header is lowerd and spining but it wont move.
Hm. I have no more ideas.
You try it on Two Rivers? Which field number? Which combine?
Edit.
Ok, one more idea.
Can you show your autocombine setting?
This setting (red box) will unload the combine while it drives. No matter, what the tractor with trailer will do.
screenshot_2015_09_29_19-15-51_Nr_01.jpg
This mode will unload the combine only when it stand. This means. When you drive with tractor and trailer to the combine, it will stop an unload.
But it will stand as long as the tractor is nearby the combine.
screenshot_2015_09_29_19-16-37_Nr_01.jpg
Ok, thats not the problem, i test it.
